caelgo2t.gif (2717 bytes)     DANIEL II REFERENCE PREAMPLIFIER SPECIFICATIONS
LINE STAGE AMPLIFIER SPECIFICATIONS
Frequency Response 5 Hz - 120 KHz +/- 0.05db
Separation > 85db to 20 KHz
THD 0.006 % @ 1 KHz
IM 0.008 % SMPTE
Gain 20 db Adjustable to 30db
Signal to Noise Ratio 0.4 uV (RMS) -68db
Input Impedance 1 MEG Ohm Adjustable
Output Impedance 300 Ohms
Output Voltage 180 Volts P-P
Tube Compliment 1 X E81CC Alt 1X 6922 / 7308
Board Dimensions D2-LN (Amplifier Module) 6.5" X 3.5"
D2-REG (Pre Regulator Module) 7" X 2.5"
D2-MPS (Power Module) 5" X 3.5"
PHONO STAGE SPECIFICATIONS
Frequency Response 20 Hz - 20 KHz RIAA: +/- 0.03 db
Separation > 85 db to 20 KHz
THD 0.008 % @ 1 KHz
IM 0.01 % SMPTE
Gain 46 db @ 1 KHz
Signal to Noise Ratio 0.12 uV (RMS) -78 db
Input Impedance 47 K Ohm Adjustable
Output Impedance 300 Ohms
Output Voltage 185 V (P-P)
Tube Compliment 1 X 6DL4, 2 X E81CC Alt: 2 X 6922 / 7308
Board Dimensions D2-PHLN (Phono & Line) 9.5" X 7"

copyright Curcio Audio 1998